密码太多记不了，怎么办？

http://a.app.qq.com/o/simple.jsp?pkgname=com.wa505.kf.epassword

补充一下更详细的解说图，在输入输出系统中存在很多类，这些类很难分清进程边界。

从图中可以看出，整个输入输出采用的是双队列缓冲。

其中的进程间通信采用的是共享内存+管道+信号量，整个通信过程没有涉及Binder。因为使用了android中的匿名共享内存，而共享内存不存在数据复制的问题，因此速度非常快。

先讲一下基本一般的输入处理方式的知识。一般的输入输出采用生产者，消费者模式，并构造队列进行处理，如下图

这种输入模型在android的系统中很多地方采用，先从最底层说起：

为了由于触屏事件频率很高，android设计者讲一个循环线程，拆分为两级循环，并做了个队列来进行缓冲。

InputDispatcherThread和InputReaderThread。InputDispatcherThread在自己的循环中对InputReaderThread请求同步，InputReaderThread收到同步信号后，把事件放入InputDispatcher的队列中。

具体代码如下：

InputReader.cpp中有很多InputMapper,有SwitchInputMapper，KeyBoardInputMapper，TrackballInputMapper，SingleTouchInputMapper，

MultiTouchInputMapper。当线程从EventHub读取到Event后，调用这些InputMapper的pocess方法：

文件InputReader.cpp中：bool InputReaderThread::threadLoop() {    mReader->loopOnce();    return true;}void InputReader::loopOnce() {    RawEvent rawEvent;    mEventHub->getEvent(& rawEvent);#if DEBUG_RAW_EVENTS    LOGD("Input event: device=0x%x type=0x%x scancode=%d keycode=%d value=%d",            rawEvent.deviceId, rawEvent.type, rawEvent.scanCode, rawEvent.keyCode,            rawEvent.value);#endif    process(& rawEvent);}

process如下

void InputReader::process(const RawEvent* rawEvent) {
    switch (rawEvent->type) {
    default:
        consumeEvent(rawEvent);
        break;
    }
}

void InputReader::process(const RawEvent* rawEvent) {    switch (rawEvent->type) {        consumeEvent(rawEvent);        break;    }}

consumeEvent(rawEvent);

方法是关键，下面继续跟进；

void InputReader::consumeEvent(const RawEvent* rawEvent) {    int32_t deviceId = rawEvent->deviceId;    {         device->process(rawEvent);    } // release device registry reader lock}

device->process(rawEvent)行，跟进去：

void InputDevice::process(const RawEvent* rawEvent) {    size_t numMappers = mMappers.size();    for (size_t i = 0; i < numMappers; i++) {        InputMapper* mapper = mMappers[i];        mapper->process(rawEvent);    }}

下面进入了IputMapper，InputMapper是个纯虚类，process是个纯虚方法，随便找个例子跟进去：

void SingleTouchInputMapper::process(const RawEvent* rawEvent) {    switch (rawEvent->type) {    case EV_KEY:        switch (rawEvent->scanCode) {        case BTN_TOUCH:            mAccumulator.fields |= Accumulator::FIELD_BTN_TOUCH;            mAccumulator.btnTouch = rawEvent->value != 0;            // Don't sync immediately.  Wait until the next SYN_REPORT since we might            // not have received valid position information yet.  This logic assumes that            // BTN_TOUCH is always followed by SYN_REPORT as part of a complete packet.            break;        }        break;    case EV_SYN:        switch (rawEvent->scanCode) {        case SYN_REPORT:            sync(rawEvent->when);            break;        }        break;    }}

最关键的是

 sync(rawEvent->when);

展开如下：

void SingleTouchInputMapper::sync(nsecs_t when) {    syncTouch(when, true); }

void TouchInputMapper::syncTouch(nsecs_t when, bool havePointerIds) {       if (touchResult == DISPATCH_TOUCH) {        detectGestures(when);        dispatchTouches(when, policyFlags);    }}

这两行，一个是虚拟键盘，一个是触摸屏。

TouchResult touchResult = consumeOffScreenTouches(when, policyFlags);

dispatchTouches

只说触摸屏，虚拟键类似，触摸屏调用的是

void TouchInputMapper::dispatchTouches(nsecs_t when, uint32_t policyFlags) {        // Dispatch pointer down events using the new pointer locations.        while (!downIdBits.isEmpty()) {            dispatchTouch(when, policyFlags, &mCurrentTouch,                    activeIdBits, downId, pointerCount, motionEventAction);        }    }}

dispatchTouch(when, policyFlags, &mCurrentTouch,                    activeIdBits, downId, pointerCount, motionEventAction);

这个方法展开如下：

void TouchInputMapper::dispatchTouch(nsecs_t when, uint32_t policyFlags,        TouchData* touch, BitSet32 idBits, uint32_t changedId, uint32_t pointerCount,        int32_t motionEventAction) {    int32_t pointerIds[MAX_POINTERS];    PointerCoords pointerCoords[MAX_POINTERS];    int32_t motionEventEdgeFlags = 0;    float xPrecision, yPrecision;    {     getDispatcher()->notifyMotion(when, getDeviceId(), getSources(), policyFlags,            motionEventAction, 0, getContext()->getGlobalMetaState(), motionEventEdgeFlags,            pointerCount, pointerIds, pointerCoords,            xPrecision, yPrecision, mDownTime);}

这样就到了InputDiaptcher的notifyMotion方法，这个方法很长，都再处理MOVE事件，将无用的删除后，留下如下关键代码：

 void InputDispatcher::notifyMotion(nsecs_t eventTime, int32_t deviceId, int32_t source,        uint32_t policyFlags, int32_t action, int32_t flags, int32_t metaState, int32_t edgeFlags,        uint32_t pointerCount, const int32_t* pointerIds, const PointerCoords* pointerCoords,        float xPrecision, float yPrecision, nsecs_t downTime) {       // Just enqueue a new motion event.        MotionEntry* newEntry = mAllocator.obtainMotionEntry(eventTime,                deviceId, source, policyFlags, action, flags, metaState, edgeFlags,                xPrecision, yPrecision, downTime,                pointerCount, pointerIds, pointerCoords);        needWake = enqueueInboundEventLocked(newEntry);}

最后一句：

 needWake = enqueueInboundEventLocked(newEntry);

bool InputDispatcher::enqueueInboundEventLocked(EventEntry* entry) {    bool needWake = mInboundQueue.isEmpty();    mInboundQueue.enqueueAtTail(entry);    switch (entry->type) {    case EventEntry::TYPE_KEY: {        KeyEntry* keyEntry = static_cast(entry);        if (isAppSwitchKeyEventLocked(keyEntry)) {            if (keyEntry->action == AKEY_EVENT_ACTION_DOWN) {                mAppSwitchSawKeyDown = true;            } else if (keyEntry->action == AKEY_EVENT_ACTION_UP) {                if (mAppSwitchSawKeyDown) {#if DEBUG_APP_SWITCH                    LOGD("App switch is pending!");#endif                    mAppSwitchDueTime = keyEntry->eventTime + APP_SWITCH_TIMEOUT;                    mAppSwitchSawKeyDown = false;                    needWake = true;                }            }        }        break;    }    }    return needWake;}

mInboundQueue正是上面所说的队列。到此为止，从InputReader插入到队列就完成了。

那么InputDispatcher又是如何从队列中取出来的呢？累了。

InputDiapather的

dispatchOnce

方法如下：

void InputDispatcher::dispatchOnce() {    nsecs_t keyRepeatTimeout = mPolicy->getKeyRepeatTimeout();    nsecs_t keyRepeatDelay = mPolicy->getKeyRepeatDelay();    nsecs_t nextWakeupTime = LONG_LONG_MAX;    { // acquire lock        AutoMutex _l(mLock);        dispatchOnceInnerLocked(keyRepeatTimeout, keyRepeatDelay, & nextWakeupTime);        if (runCommandsLockedInterruptible()) {            nextWakeupTime = LONG_LONG_MIN;  // force next poll to wake up immediately        }    } // release lock    // Wait for callback or timeout or wake.  (make sure we round up, not down)    nsecs_t currentTime = now();    int32_t timeoutMillis;    if (nextWakeupTime > currentTime) {        uint64_t timeout = uint64_t(nextWakeupTime - currentTime);        timeout = (timeout + 999999LL) / 1000000LL;        timeoutMillis = timeout > INT_MAX ? -1 : int32_t(timeout);    } else {        timeoutMillis = 0;    }    mLooper->pollOnce(timeoutMillis);}

最关键的是

  dispatchOnceInnerLocked(keyRepeatTimeout, keyRepeatDelay, & nextWakeupTime);

和

    mLooper->pollOnce(timeoutMillis);//这个是个回调。

代码又长又臭

void InputDispatcher::dispatchOnceInnerLocked(nsecs_t keyRepeatTimeout,        nsecs_t keyRepeatDelay, nsecs_t* nextWakeupTime) {    case EventEntry::TYPE_MOTION: {        MotionEntry* typedEntry = static_cast(mPendingEvent);        if (dropReason == DROP_REASON_NOT_DROPPED && isAppSwitchDue) {            dropReason = DROP_REASON_APP_SWITCH;        }        done = dispatchMotionLocked(currentTime, typedEntry,                &dropReason, nextWakeupTime);        break;    }}

dispatchMotionLocked

方法调用prepareDispatchCycleLocked，调用startDispatchCycleLocked，最终调用

       // Publish the key event.
        status = connection->inputPublisher.publishKeyEvent(keyEntry->deviceId, keyEntry->source,
                action, flags, keyEntry->keyCode, keyEntry->scanCode,
                keyEntry->metaState, keyEntry->repeatCount, keyEntry->downTime,
                keyEntry->eventTime);

或者 // Publish the motion event and the first motion sample.
        status = connection->inputPublisher.publishMotionEvent(motionEntry->deviceId,
                motionEntry->source, action, flags, motionEntry->edgeFlags, motionEntry->metaState,
                xOffset, yOffset,
                motionEntry->xPrecision, motionEntry->yPrecision,
                motionEntry->downTime, firstMotionSample->eventTime,
                motionEntry->pointerCount, motionEntry->pointerIds,
                firstMotionSample->pointerCoords);

    然后// Send the dispatch signal.
    status = connection->inputPublisher.sendDispatchSignal();
    if (status) {
        LOGE("channel '%s' ~ Could not send dispatch signal, status=%d",
                connection->getInputChannelName(), status);
        abortBrokenDispatchCycleLocked(currentTime, connection);
        return;
    }

至此，InputDisapatcher也结束了。

既然发布出去，必然有订阅者：在InputTransport.cpp中

status_t InputConsumer::consume(InputEventFactoryInterface* factory, InputEvent** outEvent) {#if DEBUG_TRANSPORT_ACTIONS    LOGD("channel '%s' consumer ~ consume",            mChannel->getName().string());#endif    *outEvent = NULL;    int ashmemFd = mChannel->getAshmemFd();    int result = ashmem_pin_region(ashmemFd, 0, 0);    if (result != ASHMEM_NOT_PURGED) {        if (result == ASHMEM_WAS_PURGED) {            LOGE("channel '%s' consumer ~ Error %d pinning ashmem fd %d because it was purged "                    "which probably indicates that the publisher and consumer are out of sync.",                    mChannel->getName().string(), result, ashmemFd);            return INVALID_OPERATION;        }        LOGE("channel '%s' consumer ~ Error %d pinning ashmem fd %d.",                mChannel->getName().string(), result, ashmemFd);        return UNKNOWN_ERROR;    }    if (mSharedMessage->consumed) {        LOGE("channel '%s' consumer ~ The current message has already been consumed.",                mChannel->getName().string());        return INVALID_OPERATION;    }    // Acquire but *never release* the semaphore.  Contention on the semaphore is used to signal    // to the publisher that the message has been consumed (or is in the process of being    // consumed).  Eventually the publisher will reinitialize the semaphore for the next message.    result = sem_wait(& mSharedMessage->semaphore);    if (result < 0) {        LOGE("channel '%s' consumer ~ Error %d in sem_wait.",                mChannel->getName().string(), errno);        return UNKNOWN_ERROR;    }    mSharedMessage->consumed = true;    switch (mSharedMessage->type) {    case AINPUT_EVENT_TYPE_KEY: {        KeyEvent* keyEvent = factory->createKeyEvent();        if (! keyEvent) return NO_MEMORY;        populateKeyEvent(keyEvent);        *outEvent = keyEvent;        break;    }    case AINPUT_EVENT_TYPE_MOTION: {        MotionEvent* motionEvent = factory->createMotionEvent();        if (! motionEvent) return NO_MEMORY;        populateMotionEvent(motionEvent);        *outEvent = motionEvent;        break;    }    default:        LOGE("channel '%s' consumer ~ Received message of unknown type %d",                mChannel->getName().string(), mSharedMessage->type);        return UNKNOWN_ERROR;    }    return OK;}

也许我们最关心的是如何订阅的，不得不取看一下JNI的代码，文件android_view_InputQueue.cpp

聚焦到这里

status_t NativeInputQueue::registerInputChannel(JNIEnv* env, jobject inputChannelObj,        jobject inputHandlerObj, jobject messageQueueObj) {    sp inputChannel = android_view_InputChannel_getInputChannel(env,            inputChannelObj);    if (inputChannel == NULL) {        LOGW("Input channel is not initialized.");        return BAD_VALUE;    }#if DEBUG_REGISTRATION    LOGD("channel '%s' - Registered", inputChannel->getName().string());#endif    sp looper = android_os_MessageQueue_getLooper(env, messageQueueObj);    { // acquire lock        AutoMutex _l(mLock);        if (getConnectionIndex(inputChannel) >= 0) {            LOGW("Attempted to register already registered input channel '%s'",                    inputChannel->getName().string());            return BAD_VALUE;        }        uint16_t connectionId = mNextConnectionId++;        sp connection = new Connection(connectionId, inputChannel, looper);        status_t result = connection->inputConsumer.initialize();        if (result) {            LOGW("Failed to initialize input consumer for input channel '%s', status=%d",                    inputChannel->getName().string(), result);            return result;        }        connection->inputHandlerObjGlobal = env->NewGlobalRef(inputHandlerObj);        int32_t receiveFd = inputChannel->getReceivePipeFd();        mConnectionsByReceiveFd.add(receiveFd, connection);        looper->addFd(receiveFd, 0, ALOOPER_EVENT_INPUT, handleReceiveCallback, this);    } // release lock    android_view_InputChannel_setDisposeCallback(env, inputChannelObj,            handleInputChannelDisposed, this);    return OK;}

也许更想知道的是消息队列在什么地方，进入InputQueue.java来看

    public static void registerInputChannel(InputChannel inputChannel, InputHandler inputHandler,            MessageQueue messageQueue) {        if (inputChannel == null) {            throw new IllegalArgumentException("inputChannel must not be null");        }        if (inputHandler == null) {            throw new IllegalArgumentException("inputHandler must not be null");        }        if (messageQueue == null) {            throw new IllegalArgumentException("messageQueue must not be null");        }                synchronized (sLock) {            if (DEBUG) {                Slog.d(TAG, "Registering input channel '" + inputChannel + "'");            }                        nativeRegisterInputChannel(inputChannel, inputHandler, messageQueue);        }    }

在ViewRoot.java中有这么几行

                    InputQueue.registerInputChannel(mInputChannel, mInputHandler,                            Looper.myQueue());

完毕。

这才牵涉到管道的问题，哪个Java中的Channel对应的正是linux系统的管道。有了管道，才能通过跨进程方式回调回来，为什么是这个入口，上面进行了解释。具体参照INputQUEUE这个java类的JNI方法

int NativeInputQueue::handleReceiveCallback(int receiveFd, int events, void* data)

这个方法被InputQueue的RegisterInputChannel注册给了系统.系统通过回调，回调的是这个ALOOPER_EVENT_INPUT事件。

looper就是android中的【用户进程的循环】

注册的代码为：

looper->addFd(receiveFd, 0, ALOOPER_EVENT_INPUT, handleReceiveCallback, this);

回调的java函数为

    回调的java代码的方法入口为：InputQueue.java中的。@SuppressWarnings("unused")    private static void dispatchMotionEvent(InputHandler inputHandler,            MotionEvent event, long finishedToken) {        Runnable finishedCallback = FinishedCallback.obtain(finishedToken);        inputHandler.handleMotion(event, finishedCallback);    }

这样就回调到了ViewRoot中

查看图片附件

Android输入输出机制之来龙去脉之前生后世

密码太多记不了，怎么办？

http://a.app.qq.com/o/simple.jsp?pkgname=com.wa505.kf.epassword

更多相关文章

随机推荐